Laser Rangefinder 650/1000m 7 Modes with Magnetic Switch

Main Features Direct compatibility: designed for Yamaha 2-stroke and 4-stroke outboard motors, from 6 HP to 300 HP. Equivalent part numbers: replaces parts 703-82510-42, 703-82510-43, and 703-82510-11, allowing replacement without modifications. Ignition and shut-off function: integrates the key ignition switch, allowing you to start and stop the engine from the remote control box. Control box mounting: installs into the remote control assembly, maintaining the original helm position. Marine use: designed for boats with Yamaha engines that need to replace the ignition switch due to wear, breakage, or lost key. Frequently Asked Questions Is it compatible with my Yamaha engine? It is intended for Yamaha 2-stroke and 4-stroke engines with power ratings between 6 and 300 HP that use part numbers 703-82510-42, 703-82510-43, or 703-82510-11. Compare the part number of your current switch before purchasing to confirm the match. Does it include the ignition key? The assembly is presented as an ignition switch with key for remote control box. Check the seller's description to see if the lot includes one or multiple keys, as this may vary by listing. Does it work for both 2-stroke and 4-stroke engines? Yes, the part number is designed for both engine types within the indicated power range, as long as the connector and mounting match the original control box. Physical Specifications Weight, dimensions, and material data are not available in the provided information. Check the seller's listing for exact measurements before purchasing.

Main Features Dual function: integrates a flow switch and a flow sensor in a single device. Flow detection: allows monitoring the presence or absence of flow in liquid or gas systems. Contact output: the switch activates or deactivates electrical circuits according to the flow status. Proportional signal: the sensor generates an electrical signal proportional to the detected flow rate. Versatile installation: compatible with pipes and ducts of different diameters using adapters. Industrial applications: ideal for refrigeration systems, HVAC, chemical processes, and pump control. Frequently Asked Questions What is the difference between a flow switch and a flow sensor? A flow switch is a switch-type device that activates or deactivates when the flow reaches a certain threshold, while a flow sensor measures the flow rate continuously and provides a signal proportional to the flow. In what type of systems can this device be installed? It can be installed in piping systems for liquids or gases, such as water circuits, refrigerants, compressed air, and other fluids compatible with the device materials. Does it require periodic maintenance? Periodic inspection is recommended to ensure there are no obstructions or wear on moving parts, especially in applications with dirty or corrosive fluids. Physical Specifications Dimensions and weight may vary depending on the specific model. Consult the manufacturer's documentation for exact data on size, connections, and materials.

Key Features Replacement CDI ignition module (Power Pack) for Mercury outboard motors. Compatible with 4, 9.8 and 20 HP models from the A4, A6, A8 and A10 series. Original reference part number: 339-6222. Equivalent to Sierra reference 18-5788. Replaces the ignition unit when the engine loses spark or misfires on cylinders. Installs on the same connector and mounting as the original component. Frequently Asked Questions Which Mercury engines is this switch box compatible with? It is designed for Mercury outboard motors of 4, 9.8 and 20 HP belonging to the A4, A6, A8 and A10 series. Check the reference stamped on your original unit before purchasing. Does it directly replace references 339-6222 and Sierra 18-5788? Yes, it is a replacement for those references. It connects to the original harness and is secured with the same mounts, so no adapters are required. What symptoms indicate the CDI Power Pack is failing? The most common are no spark, hard starting, ignition cutout at high RPM, or irregular operation of one or more cylinders. Physical Specifications Component type: CDI ignition module / Power Pack. Original reference: 339-6222. Equivalent reference: Sierra 18-5788. Application: Mercury outboard motors 4, 9.8 and 20 HP (A4, A6, A8, A10 series).

Main Features Specific Compatibility: Designed for Volvo Penta outboard engines and boats from the DP, DP290, DPX, SX, SP290, and SP-E series. Dual Function: Allows you to control both trim and tilt of the engine from a single panel. Reference Numbers: Directly replaces parts with numbers 3855560, 3855650, 853846, and 873617. Presentation: Two switch units are supplied to cover both control positions. Direct Installation: Connectors and format are designed to fit the original panel without modifications. Frequently Asked Questions How do I know if this switch is compatible with my Volvo Penta engine? You must verify that the part number of your current switch matches one of the following: 3855560, 3855650, 853846, or 873617. You can also check that your engine belongs to the DP, DP290, DPX, SX, SP290, or SP-E series. Are installation instructions included? The product is supplied as two switches. Installation requires basic knowledge of marine electrical systems, and it is recommended to follow your engine's service manual for correct connection. Do the switches come with cables or connectors? The switches are presented as individual units. No additional cables are included; the original connectors from the boat's harness are used. Physical Specifications Product Type: Trim and tilt control switch. Quantity: 2 units. Compatibility: Volvo Penta DP, DP290, DPX, SX, SP290, SP-E. Reference Numbers: 3855560, 3855650, 853846, 873617.